parameters

Power source: AC220; 50/60Hz.

Capacity factor: 60W.

Control type: inching hand shank.

Table surface dimensions: 1850×600mm.

Table surface height: 600mm.

Overall dimensions: 1950×710×800mm.

Standing up angle: 0°~90°(adjustable).

Pedal Up & Down adjusting angle: -10°~10°(take upward direction as positive)

Technological advantages

It consists of six parts: frame of training bed, armrest desktop, fixing strap, standing panels, table panel, and angle control device. In standing up training, let the user lie flat and be fastened by table panels, fixing strap, and armrest desktop on table surface. The table panels can change the posture of body gradually from 0°(prone position) to 90°(standing up position) by angle adjusting device. You can adjust the angle at will.

Performance Index

1. Angle Adjustment: 0°~90°

2. Appearance Size:190×60×62 (cm)

Usage Method

1. Conform the connection is reliable,turn on the landing handle of the castors to land the frame onto the ground,get ready before using.

2. Unfasten the infront and back adjusting screw of the desktop,take the desktop down,loose the fixed belt,let the patient lie low on the bed board,feet touch the standing board,then install the desktop and adjust its right height,next fix the the patient on the bed board by fixed belt.

3. Angle adjustment method:shake handle,the bed board begins to tilte to level.The control button can be operated by nurse to chose therapeutic angle,or operated by the patient to chose the appropriate tilte angle of physical condition.

Matters Need Attention

1. Severe Cases must be warded under the professional nurse,when they use the training bed.

2. The surfaces of the desktop,standing board,bed board and the fixed belt must be disinfect at fixed period,prevent hospital infection, must

disinfect more than twice a week.

3. The fixed belt must checked at fixed period,once a week at least in order to prevent accidents,because it’s consumable store.

4.FY-XYQ-2 should be deposited in room,keep steady before using it.The packed training bed should be stored in indoor environment of -40℃~70℃ dry,aeration and no corrosive gases.

5. The product is kept in repair for one year under normal usage.